M-F 8:00 AM - 5:00 PM (Pacific)

Parker Cylinders

Parker Cylinders

Medium, and Heavy Duty Hydraulic Cylinders

Tie rod construction, Non-tie rod construction, 12-18 standard mounting styles depending on the cylinder construction series

 2H Series

Heavy duty service with industrial tie rod construction

 3H Series

Heavy duty service with industrial tie rod construction.

3L Series

Medium duty service with industrial tie rod construction

 CHE Series

Compact hydraulic cylinder

  • Nominal pressures up to 3000 psi (207 bar).
  • Standard bore sizes 1.50″ – 6.00″.
  • Piston rod diameters 0.625″- 4.000″.
  • Strokes available in any practical length.
  • 18 standard mounting styles.
  • Exclusive “Jewel” Rod Gland with TS-2000 Rod Seal
  • Parker stepped cushion for increased performance and productivity
  • Rod ends: four standard choices, specials to order.
  • Nominal pressures up to 3000 psi (207 bar).
  • Standard bore sizes 1.50″ to 6.00.
  • Piston rod diameters 3.000′ to 10.000″.
  • Strokes available in any practical lengt.
  • 16 standard mounting styles
  • Parker stepped cushion for increased performance and productivity
  • Rod ends: Four standard choices, Specials to order
  • Nominal pressure up to 1000 psi (70 bar)
  • Standard bore sizes 1.00″-8.000″
  • Piston rod diameters 0.500″-5.500″
  • Strokes available in any practical length 
  • 15 Standard mounting styles
  • Exclusive “Jewel” Rod Gland with TS-2000 Rod Seal
  • Parker stepped cushion for increased performance and productivity
  • Rod ends: four standard choices, specials to order. 
  • Repairable construction, aluminum alloy extruded design
  • Bore sizes from 20mm-100mm
  • Strokes in 1mm increments up to 150mm dependent on bore size
  • Piston rod diameters 12mm-56mm
  • Single and double rod designs
  • 6 standard mounting styles
  • Nominal pressures up to 140 bar (2030 psi) dependent on bore size
  • Four standard rod end styles with special ends available
  • Available with SAE, NPTF and BSPP ports
  • Magnetic Piston and position sensing switches available. 

CHD Series

Compact Hydraulic Cylinder

RDH Series

Heavy duty hydraulic roundline cylinder

ETH

Frame sizes ETH032/ ETH050/ ETH100/ ETH125

 HMI Series

Nominal pressures up to 210 bar (3045 psi)

  • Repairable construction, steel body design
  • Bore sizes from 20mm – 80 mm
  • Strokes in 1mm increments up to 100mm dependent on bore size
  • Piston rod diameters 12mm – 45mm
  • Single and double rod designs
  • 13 standard mounting styles
  • Nominal pressures up to 207 bar (3000 psi)
  • Four standard rod end styles with special ends available
  • Available with SAE, NPTF and BSPP ports
  • Manifold ports available on foot mounting
  • Standard threaded head and welded cap construction
  • Nominal pressures up to 3000 psi (207 Bar)
  • Bore sizes from 1.50″ – 8.00″
  • Piston rod diameters 0.625″- 5.500″
  • Strokes available in any practical length
  • Rod ends: Five standard choices, specials to order
  • Nine standard mounting styles. 
  • Screw pitch 5, 10, 16, 20, 32 mm
  • Precision Class 7 Ball Screw
  • Stroke up to 79: (2000mm)
  • Traction/thrust force up to 25, 600 lbs. (114kN)
  • Speed up to 60 inches per second (1.7m/s)
  • Equivalent dynamic axial force at a lifetime of 2500 km up to 49.6kN
  • Efficiency up to 90%
  • Position repeatability up to ±
  • 0.03mm
  • Acceleration up to 15ms2
  • Metric hydraulic cylinders with bore sizes 25mm- 200mm
  • ISO 6020/2 mounting interchangeable
  • Up to three rod sizes per bore
  • Wide range of mounting accessories
  • Up to three male and three female rod end threads per bore
  • Strokes available in any practical length
  • Piston rod diameters 12mm- 140mm
  • Single and double rod designs
  • 12 standard mounting styles
  • Exclusive “Jewel” Rod Gland with TS-2000 Rod Seal
  • Seal types to suit a wide variety of operating environments
  • Parker stepped cushion for increased performance and productivity.

 XFC Series

All Steel Construction
Elastomeric seals throughout

WaveScale

Linear displacement transducer (LDT) feedback

Intellinder

Suitable for hydraulic pneumatic and electromechanical cylinder applications

Custom

Cylinder assembles can integrate other hydraulic products such as, Fluid connectors, manifolds, valves, accumulators, filtration, etc. 

  • Elastomeric seals throughout
  • Standard metric hydraulic type tie rod construction
  • Opposed preloaded angular contact bearings
  • Roller screw drive system
  • inline and parallel gear drive configurations
  • Speeds up to 40 inches per second (1 m/s)
  • Continuous  thrust ratings up to 80,000 lbs (356 kN)
  • Strokes from 50 mm to 2000mm in 1mm increment
  • Anti-rotate and rotatable rod configurations 
  • Other motor mounts available
  • WaveScale embedded design maintains NFPA dimensions 2.00″ – 6.00″ bores
  • Eliminates need for a limit switches, deceleration valves, shock absorbers and mechanical linkages in many applications
  • Nominal pressures up to 3000 psi (207 bar)
  • Piston rod diameters 1.000″-4.000″
  • Wide variety of stroke lengths available
  • Exclusive “Jewel” Rod Gland with TS-2000 Rod Seal
  • Parker stepped cushion for increased performance and productivity
  • Low friction seals available
  • Seven bolt-on and four integral manifolds available
  • Simplifies machine design and reduces number of hydraulic lines
  • Integral mounted valve eliminates assembly time and fittings
  • Eliminations need for limit switches, deceleration valves, shock absorbers and mechanical linkages in many applications
  • Nominal pressures up to 3000 psi (207 bar)
  • Piston rod diameters 1.000″-10.000″
  • Stroke lengths to 20.00′
  • 0- 10v, 4- 29mA – J1939 outputs
  • Sustains performance in applications exposed to vibration, dust, gravel, corrosives, chemicals, axial load, side load, and immersion
  • Features highly sensitive health monitoring to detect and diagnose potential cylinder malfunctions before they can disrupt operations
  • Bores to 48.00″ (1219 mm)
  • Strokes to 876″ (22250 mm)
  • Operating pressures to 15,000 psi (1034 bar)
  • Intensifier pressures to 60,000 psi (4138 bar)
  • Welded, bolted/mill-type, tie rod, telescopic and crimped construction styles
  • Many construction materials include: Carbon Steels, Stainless Steels, Exotic Steels, Aluminum, Composite
  • Wide Variety of rod coatings include: Hard Chrome, Chrome-Over-Nickel, Global Shield, Nitrotec/Nitride, Ceramic, Laser Clad
  • Available third party approvals and certifications include: ABS, DNV, BV, USCG, Lloyd’s Register, ASME, Nuclear and MIL-1-45208
  • Common options include cartridge/ counterbalance valves, epoxy paint, continuous feedback devices, low friction seals, mechanical linkage, etc. 
  • Custom cylinders are designed to the customer application and specifications

Need something?